Ryan's Room

nope, this one is not about the builder Ryan; rather, my son.
You build and have all these grand ideas on what you want to do.  Some you act on pretty quick while others slip away in time.  My better half and I have wanted to give Ryan a cool room.  Something a 12year old will enjoy and also something that a future 16-17 year old would be good with as well.  Think to the future here people!  It took us a 1.5years, but we did it.

Please excuse the blurry photos, what do you want from a crappy phone camera!?
I don't have before pictures.  But it's not hard to imagine.  a bed and dresser in a flat paint "whole wheat" color.  bleh.

The blue chair and desk legs are from Ikea.  The desk top I cut and edged myself.  The magnetic board, magnets, and "towel bar thingy" are from ikea.  The curtain rod is galvanized pipe.

The hex shelves I built with 3/4 ply.  They were glued and then I added 1" brackets for both assembly reasons, but also because I thought it looked cooler.

The skateboards are held up with skateboard brackets we found at Ikea.

I cut Ryan's nickname out of sentra and attached with 3M poster strips.  The bedspread, again, purchased from Ikea.

The room was painted with Behr "lunar surface" gray (in satin). 
My wife wanted an orange stripe around the room.  While I have mastered the ability to paint stripe with no bleed, I was not looking forward to measuring, marking, taping, painting the stripe.  I came up with another idea.  What if we ripped (11.5") strips of 1/8" hard board, paint those orange and nail to wall with finish nails.  Way easier and keeps with the theme of his room.

Needless to say, Ryan loves his new room.

The Driveway's SEAL of approval

I, at times, can procrastinate.

There, I said it.  whew, I feel better.

We moved in to the new house January 2012.  So it's been about 19 months!  wow.  My PM heavily encouraged us to seal the drive way as soon as possible.  Turns out "asap" was 19months.  Don't judge!

I bought the stuff I needed to seal the driveway late last year and then read the instructions that said the temps should not drop below 60degrees for 24 hours.  Did I say I bought it late?  yup, it was getting down to the 40's at night.  So I sat on the can.

Literally, we have sat on that huge 5 gallon bucket now for several months.  Sat on it, put drinks on it, books, phones, etc.....

Until this weekend!  This weekend I took back the driveway.  The snow, ice, and salt will not win this year.

I used this SealBest Concrete Sealer.  I bought it at Menard's, which by the way I believe is an awesome store!  I wish it was closer.


For those that want to seal your driveway (which should be everyone reading this), know that it was pretty easy.

First, I pressure washed.  It was rather therapeutic watching 19months of dirt get stripped away.
Second, I grabbed a 3" paint brush and brushed around the porch columns.
Third, I borrowed my neighbors pump sprayer.  This is a must!  Made the job go very fast 
With the nitty gritty paint brush work knocked out, I began to spray.  That 5 gallon bucket gave me enough to do two coats on my porch, walkway, driveway and sidewalk.

Now my concrete is pimp'n with a little sheen to it.

The Trashcan Solution

Seriously, this could be the idea of the year!

Most of us building in a new neighborhood have various HOA restrictions and guidelines for trash can.  Some more extreme then others.  Ours is pretty laid back, by that I mean it states trash cans can not be visible except on trash day BUT since most of us in my 'hood have hilly yards many of us have it "hiding" somewhere in front.  Why?  Well you either leave the cans in your garage OR you develop an invisibility cloak and leave in the front.  I try the garage, but it gets real stinky this time of year.  I hate it being in front, looks ....wait for it....TRASHY!

Being that we recycle (I take the recycling myself to local drop off point....why pay for it?) we do not have a lot of trash.  In fact, our kitchen trash can uses the plastic bags we bring groceries home in. 

So what if I buy a barrel for $90, cut it (I have a jig at work from when I cut up barrels for a job) for holding a can and place it conveniently in front like decoration?  Place a large garbage bag in the can and when it gets full, tie it up and place it out front for trash pick up.

Genius!  who ever did this and posted on pinterest deserves a great trash salute!

Batteries, my arch nemesis!

nem·e·sis  (nm-ss)n. pl. nem·e·ses (-sz) 1. A source of harm or ruin

If you would rather skip the whining, let me sum this post up for you....
change out your back up batteries in your smoke alarms!!
Did you get that?
Why the large type you ask?  Well because I am driving home the point that laziness and/or cheapness may cost you sleep.
Two "mornings" ago, at 0400 (and having gone to bed late the night before) my bedroom smoke alarm decides NOW is the time to let me know the back up 9volt is dead.  How does it do this?  With a chirp every 60 seconds.  
"change it out you say", if I kept 9 volts, I would.  So once I kicked the dancing unicorns ridden by lucky leprechauns in fields of cotton candy dreams from my brain housing group and figured out what may be the cause of the incessant chirp I began to root through the house for a 9volt.  I have a lifetime supply of AA, but I have been reduced to scrounging through my son's toys for a 9volt.  I found one.....but it was dead as well.  
The chirping continues.
I know! I will swap it out with the basement.  5 minutes later, success!  except I can hear that damned chirping all the way into my bedroom creating a blockade to sleep and dreams of unicorns. 
Exasperated, my wife decided to halt my quest to just disconnect the alarm (or shoot it) and headed out to Walgreens.  Twenty minutes later, we had some new, expensive as shit, 9volt batteries.  
Crisis averted....at 0505.  
Back to bed for about 40 minutes before the day started.

Having lived in the house for 1.5years, I have every intention to mark and replace back up smoke alarm 9volt batteries every 12 months.....as long as cheapness doesn't take hold and I wait for the next one to chirp; I mean hell, them 9volts must be filled with rare diamonds to cost $15 for 4!
      

Lubing the Garage Door and Corn hole

Easy killers,
I didn't mean that this post was about lubing your corn hole!  sickos.
I merely am referencing two topics of this blog post.

First, and with no pictures; sorry, but I am pretty sure you don't need me to post pictures of the garage hinges!
Since the day we moved in, our garage door has sounded LOUD and horrible.  Specifically it squeeks, pops, and generally sounds like it's 100 years old.  The opener itself is quiet, but the door sounds like it's going through the grinder.  I mentioned it at the 10month inspection and I received the "you just need to lube it" speech.  I would have thought they would do that for me, but what do I know.  I knew I needed to do it, and I was tired of hearing it.  The catalyst for action was when I went into my friends garage for something and it was whisper quiet.  THAT'S IT, I'm doing something about this.
So off to Home Depot I go and purchase this...
http://www.homedepot.com/p/Blaster-11-oz-Dry-Lube-Silicone-Lubricant-16-SL-THD/202529794#.UdHky5wqS5M
WARNING, you can go back to garage doors and purchase "garage door lubricant" for twice the cost OR buy this shit!  I used to work with mechanics who swore by Blaster products.

I went home, watched a quick video on "how to lubricate a garage door" (thank you youtube for solving most of my questions).  The video was helpful, I suggest you watch it.
http://www.youtube.com/watch?v=Y1lUm7koF2A.
why did it help? well for starters he points out you should lube the TOP of the track versus the bottom like most suggest.

Out to the garage I go with my new can of Blaster in hand and get to spray'n.  It took about a half hour, but it did the trick.  Initially the result was better, but not perfect.  But as the days passed, and the lube worked it's way in, it got quieter and quieter.  Now I barely hear it and almost enjoy listening to it open and close.

Second, I made some cornhole boards.  My daughter asked me to make her boyfriend (and this one I like....he is a Marine) a set of cornhole boards.  He was just thinking I might paint a simple image for the Bengals, Reds, or USMC theme.  But I decided to run with it.  I designed the boards with his MOS and rank in mind.  Add that to the fact I work for a kick ass company that has kick ass printing abilities and voila.....kick ass USMC cornhole boards.

And if you don't know what cornhole is?  google it....I dare ya!  haha.....j/k it's become a pretty popular yard game.  Web search is a lot less shocking in the last ten years. 

that's all I got for now,
carry on

It was just too mulch

What do you do when you lack vision in respects to landscapping?

You dig out the year old mulch and lay sod!

All last year my wife and I debated on how to edge this huge mulch bed area.  Kids and dogs jump off the front porch and into the mulch, kicking it up on the concrete walk way.  They when I mow, it throws clippings into the mulch.  Add to that our lack of vision in figuring out what to plant in this huge area that will look nice without costing an arm and leg.  In a moment of lucid thought, I considered laying sod.  I ran the idea past my better half and she loved it.  One week later we knocked it out.
Next steps are to build a straight, few course stone wall separating the smaller mulch bed from the new sod.  Then plant a couple hydrangeas and call it done.

In hindsight, I wish I would have had sod put there when they did the front lawn. 

Miter Saw station part 1

I so often show my projects at home.  I figured I would show one from work.  I am responsible for the (wood) shop at work.  For three years now, I have been using my Dewalt sliding compound miter saw on a collapsible Dewalt miter stand.  These stands work in a pinch, but I have a strong dislike for an everyday use. 
With some un-used metal cabinets, left over melamine and birch ply, and some purchased Poplar (Trim&Fence), I put this together.

I am not finished yet.  I decided to use the left 50" cabinet as a router table as well.  Last night I purchased T-Track that I will route and install in the table top.  This will allow my saw and left fence to move forward and backword with a quick release lever.  I will also have a piece that runs the length of the cabinet for add-on like feather boards, guides, etc....

When finished, I will have a highly useable miter station/router table for a fraction of the cost.

When this is done at work, I will have to start on one similar for home!

that is all
carry on